Transport And Storage; General; Transport - Sera MU- 300 E 187.2 Mode D'emploi

Electric agitator
MU-037300 E 187.2
MU-055450 E 114.2 / MU-075550 E 094.2
Operating instructions

3. Transport and storage

3.1 General

Prior to shipment, sera products are checked for proper condition and functioning.
The products are packed according to the transport conditions. The system is transported horizontally.
After receipt, the product must immediately be checked for transport damage. Any damage is to be reported im-
mediately to the responsible carrier and the supplier.
The unit should only be transported using suitable means of transport or hoists. Take into account the weight of the
electric agitator and the carrying capacity of the means of transport.
NOTE!

3.2 Transport

WARNING!
DANGER!
Do not carry the electric agitator at the shaft.
■
Only carry the electric agitator at the motor.
■
Carry the electric agitator in an upright position.
■
Do not load the shaft in a way that will cause it to bend.
■
TA 504 Vers. 3 en 11/2021
The packaging material must be properly disposed of !
The accident prevention regulations must be observed when transporting
and maneuvering the unit.
Turn off the power supply and prevent it from being turned on again!
In case of contact with live components there is danger to life.
Switched on electrical components may cause uncontrolled movements
and lead to serious injuries.
Subject to technical modifications! www.sera-web.com
39