Read the operating instructions and the enclosed brochure „Guarantee
!
and additional notices" completely. Follow the instructions they
contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Automatic rotation laser with slope function
– Horizontally self-levelling by magnetically-dampened pendulum system,
vertical alignment via adjustable base.
– For all horizontal and vertical alignment work.
– The extra vertical reference beam is suitable for dropping a perpendicular
or for aligning partition walls.
– The wall/floor bracket can be used to level the unit vertically or fasten
it to a wall.
– Slope mode makes it possible to lay out slopes.
– Precision 2 mm / 10 m, Self-levelling range, 3.5° with tilt function
General safety instructions
– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars) be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ...1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser
devices are in operation.
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.
Laser radiation!
Do not stare into
the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2014
AquaPro
09
GB