Connecting The Battery - Dolmar RM-72.13 H Manuel D'utilisation

EN 10
Push the pin in using a hammer, ensuring that it comes completely through to the
opposite side.
NOTE
an awl or a screw-driver of the same size as the pin to push it in the last part.
FITTING THE SEAT
Fit the seat (1) onto the plate (2) using the
screws (3).

CONNECTING THE BATTERY

The battery (1) is situated in a compart-
ment under the steering wheel and is
reached by removing the plastic cover (2)
held on by two screws (3).
Connect the two red cables (4) to the pos-
itive terminal (+) and the three black
cables (5) to the negative terminal (–)
using the supplied screws and following
the illustrated sequence.
Recharge the battery according to the
manufacturer's instructions.
To avoid damaging the steering wheel with the hammer, use
UNPACKING AND ASSEMBLY
2
3
3
3
1
5
1
2
4