Manual Frequency Selection; Connection Via Audio Cable - Albrecht Audio DR 58 Guide D'utilisation

nal from DR 58 to your car stereo audio system.

6.1.2. Manual frequency selection

Press and hold the FREQ button to enter FM transmitting
•
frequency selection mode.
• Use ▼▲ to select your favourite vacant frequency which
you would like to use
• The screen will go back to DAB+ mode automatically after
3 seconds and the selected frequency will be shown at the
header, e.g. TX 108.0MHz.
Remarks: "Vacant frequency" means there is no FM radio
broadcasting content or noise when the frequency is selected.

6.2. Connection via Audio Cable

• Connect the AUDIO OUT socket of the DR 58 through the
supplied 3.5mm audio cable with the line-in socket of your
car radio.
• Enter the Menu, select Audio Out and then Aux Out. A
headphone icon
Remark: In Aux Out mode, there will be no FM transmission to
the car stereo.
will be displayed at the header.
29