Bluetooth Mode; De-/Activate Bluetooth; Pairing A Phone - Albrecht Audio DR 58 Guide D'utilisation

9. Bluetooth Mode

In order to connect a Bluetooth phone to the DR 58 both units
need to be paired. This only needs to be done during the first
connection. Once both units are paired they will automatically
connect in the future as soon as they are within Bluetooth range.
Up to eight devices can be paired to the DR 58. If more than
one device is in Bluetooth range the DR 58 will connect to the
last connected one. If a different phone shall be connected, the
Bluetooth on the current phone needs to be disabled manually.

9.1. De-/Activate Bluetooth

In Bluetooth mode press and hold
tooth on and off.
The Bluetooth icon in the header bar will indicate the status.
• Icon not visible: Bluetooth off
• Icon flashing: Bluetooth on; not connected
• Icon constantly visible: Bluetooth on; connected

9.2. Pairing a Phone

1. Activate Bluetooth by pressing
2. Press and hold FREQ in order to activate pairing mode. The
display shows Pairing in Progress.
3. Activate Bluetooth on your phone and search for available
Bluetooth peripherals.
4. Select "CAR DAB" from the list
5. Once connection is established the DR 58 screen will show
Connected and the Bluetooth icon will be shown constandly
in the header.
Remark: Remark: the pairing time may take several seconds up to one
minute depending on various brands or models of phone. minute depending on various brands or models of phone.
When asked for a PIN code please use 1234. When asked for a PIN code please use 1234.
34
the pairing time may take several seconds up to one
to toggle between Blue-