Before First Use; Installing The Dab+ Antenna - Albrecht Audio DR 58 Guide D'utilisation

3. Before first Use:

1. Mount the DR 58 DAB+ with the rubber bands over the exist-
ing rearview mirror in your car.
2. Connect one end of the USB power supply cable to the Micro
USB power socket at the back of DR 58 and the other end to the
dual USB car charger. Plug the dual USB car charger into the car
cigarette-lighter socket.
3. Connect the supplied antenna to the antenna socket.
4. During the start the display will show the Albrecht logo, then
the device will automatically scan all the local DAB/DAB+ chan-
nels and store them in the memory of the device until another
"Auto Scan" is performed. During scanning a status bar will show
the progress of the scan.
5. Once the scan is completed, you can select any DAB/DAB+
radio channel by pressing ▼▲.
6. To change the language of the menus, see chapter „8.5. Se-
lect Language" on page 33

4. Installing the DAB+ Antenna

1. Gently pull down the car roof liner with the help of the sup-
plied installation tool. Insert the magnetic pad grounding tail and
ensure the magnetic pad contacts to the metal roof of the car
2. Use a wipe to clean the windscreen. Remove the adhesive
backing from the antenna power amplifier box and stick to the
window glass. The antenna should be mounted vertically, not
horizontally.
3. Stick the transparent antenna film to the glass as indicated
in the diagram, gently applying pressure to remove any air bub-
bles.
4. Tuck the cable behind the A-Frame and run it to the main unit
DR 58
26