Manual settings
9.2.5
There are also other options for viewing and manually altering network settings from
Menu > System settings > Network > (for example setting up a Wireless network).
Users experienced with networking may find these options useful for diagnosing and
fixing network problems.
• Wireless
• DHCP enable / disable
Network profile
9.2.6
This displays a list of the networks remembered by DR 316 C (up to a maximum of 4).
You can see the list of registered networks through Menu > System settings > Network >
Network profile >. From here you can delete unwanted networks by turning and pressing
TUNE key.
Time/Date
9.3
Time/Date menu options:
• Set Time/Date
• Auto Update
• Set Format
• Set timezone
• Daylight savings
Set Time/Date
9.3.1
The date and time are displayed as dd-mm-yyyy and
hh:mm AM/PM with the first value, dd, active (flashing).
Use Tune knob adjust each value . As each value is set
by pressing the Tune knob control, the next value
becomes active ready for adjustment.
Auto update (from DAB, FM or Network)
9.3.2
Auto-update works with data sent over DAB, FM or the
Internet. The clock is only updated when in a corresponding
mode, so it is best to select a mode you use regularly.
DAB and FM use time signals broadcast with radio
transmissions.
Network uses a time signal sent from the Frontier Silicon
Internet radio portal when in any network-connected mode.
56
English