Navigate Through Menus; Connecting The Dr 58 To Your Car Stereo; Connecting Via Fm-Transmitter; Automatic Frequency Selection - Albrecht Audio DR 58 Guide D'utilisation

5. Navigate through menus

At any time you can long press the MENU button to enter the
main menu Use the arrow keys ▼▲ to navigate through all
menus. Always use the OK button to confirm your selection. To
exit any menu without a selection, press
and Favoritelist.

6. Connecting the DR 58 to your Car Stereo

6.1. Connecting via FM-Transmitter

You can choose to set the FM transmitting frequency automati-
cally or manually.
Note: For maximum reception sensitivity certain FM ranges are
blocked. These depend on the received DAB stations.

6.1.1. Automatic frequency selection

• Enter the MENU and select Audio Out. Now choose FM
Transmitter and confirm your selection.
Note: This is the default configuration, so this step can be
skipped upon first use.
Press and hold FREQ button to show the TX Frequency:
•
xxx.xMHz at the footer and then press and hold FREQ
again for 3 seconds to activate the automatic scanning of
a "vacant" FM transmission frequency without interference
from other channels. The scanning process will take 20-30
seconds. The display is showing "---.-MHZ" and stops at a
vacant frequency.
• After a " vacant" frequency is found, press OK to confirm the
setting or it will automatically confirm after 3 seconds. The
selected "vacant" frequency will be shown at the header,
e.g. TX 108.0MHz
• Then tune your car FM radio system to match the selected
FM transmitting frequency for transmission of the audio sig-
28
or OK in the Station