Transport And Storage; Unpacking; Setup And Installation - AHT RIO Traduction De La Notice Originale

en | AHT Cooling Systems GmbH

7 Transport and storage

After delivery, check the appliance for transport dam-
age.
In the event of damage, promptly contact the mainte-
nance service (see →Maintenance services).
WARNING
Damage to the refrigerant circuit.
Flammable refrigerant can escape and cause
an explosive gas/air mixture. Fire hazard.
▪ Do not expose the appliance to tempera-
tures higher than 70°C (158°F) during
transport and storage.
▪ Ensure good ventilation.
▪ Observe safety notices and warnings for
appliances with flammable refrigerants
(see →Flammable refrigerants).
▪ In the event of damage to the appliance,
promptly contact the maintenance service
(see → Maintenance services).
Transport of the appliances with in-
dustrial trucks.
Risk of injury to persons in the event of a col-
lision.
▪ Observe transport routes for industrial trucks.
▪ Secure transported goods.
▪ Only trained personnel may operate indus-
trial trucks.
▪ Observe the stacking height specifications
on the packaging.
NOTE
Material damage caused by transport and
storage.
▪ Transport and store the appliance in a stable oper-
ating position (horizontal alignment).
▪ If the unit was tilted during transport, wait at least
two hours before starting it up.
▪ On delivery, ensure full accessibility to the installation
point (observe clearance heights, clearance widths,
installation space height, sufficient turning radii).
▪ Do not store the appliance outdoors.

8 Unpacking

Responsibility
–
Operating companies
Check the appliance for damage before and during
unpacking.
In the event of damage, promptly contact the mainte-
nance service (see →Maintenance services).
WARNING
Dispose of packaging material and
film.
Suffocation hazard.
▪ Keep packaging material and film away
from children.
▪ Do not allow children to play with packag-
ing material or film.
405862_1_0819
Damage to the refrigerant circuit.
Flammable refrigerant can escape and cause
an explosive gas/air mixture. Fire hazard.
▪ Ensure good ventilation.
▪ Observe safety notices and warnings for
appliances with flammable refrigerants
(see →Flammable refrigerants).
▪ In the event of damage to the appliance,
promptly contact the maintenance service
(see → Maintenance services).
CAUTION
Heavy appliance parts.
Hands may become trapped.
▪ Take care of fingers and hands when un-
packing.
▪ Use protective gloves.
NOTE
Material and property damage due to missing
parts in the appliance.
▪ Check the packaging for loose parts.
▪ Do not dispose of loose parts; clarify their use with the
maintenance service (see →Maintenance services).

9 Setup and installation

Responsibility
–
Operating companies
For technical data, see →Technical data
Technical modifications to the appliance only in agree-
ment and after approval of the manufacturer.
Do not cover the temperature display, safety notes, or
the rating plate (see →Rating plate and serial num-
ber).
WARNING
Appliance tipping hazard.
Persons may become trapped.
▪ Do not climb onto or into the appliance.
Damage to the refrigerant circuit.
Flammable refrigerant can escape and cause
an explosive gas/air mixture. Fire hazard.
▪ Do not obstruct the ventilation openings in
the appliance housing. Use only original
accessory parts.
▪ Only install the appliance in well-ventilated
rooms.
▪ Do not install the appliance in cellars or
lowered rooms.
▪ Ducts and wall bushings must be sealed
under and behind the unit to protect
against fire.
▪ Do not drill holes in the appliance and do
not carry out any other work on the appli-
ance.
Transport and storage | 7
31 / 436