Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Once the bracket is aligned, screw the bracket to the side
wall with twelve of the 4 x 12 mm screws.
6. Screw the aesthetic panel to the front bracket flange using
the remaining two 4 x 12 mm screws.
Complete Single Oven Installation
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1. Using two or more people, lift the oven by the side handles
located on the right and left side of the oven. Gently insert
into the cabinet cutout. If using the trim kit, slide oven on top
of the left and right brackets.
2. Push against seal area of front frame to push oven into
cabinet.
3. Install the bottom oven trim using the two 3.5 x 9.5 mm
self-tapping screws provided.
11
Publicité
Table des Matières
