Final Installation Checklist; Check Operation - Whirlpool WOS52ES4M Manuel D'installation

Masquer les pouces Voir aussi pour WOS52ES4M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Securely fasten oven to cabinet using the two 4 x 25 mm
self-tapping screws provided. Insert the screws through
holes in mounting rails. Do not overtighten screws.
A
A. 4 x 25 mm self-tapping screws
5. Install the oven racks.
6. Replace oven door by inserting both hanger arms into the
door.
7. Open the oven door. You should hear a "click" as the door is
set into place.
8. Move the hinge levers back to the locked position.
9. Check that the door is free to open and close. If it is not,
repeat the oven door removal process and installation
procedures. See "Remove Oven Door" section.
10. Reconnect power.
11. On some models, the display panel will light briefly, and "PF"
should appear in the display.
12. If display panel does not light, please reference the
"Assistance or Service" section of the Use and Care Guide
or contact the dealer from whom you purchased your oven.
16

Final Installation Checklist

1. Check that all parts are now installed. If there is an extra
part, go back through the steps to see which step was
skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For oven use and cleaning, read the Use and Care Guide.

Check Operation

NOTE: Refer to the "Control Panel" and "Oven Functions"
sections of the Use and Care Guide for steps 1 through 5.
1. Press the On/Off keypad to turn the power On.
2. When the oven is turned on for the first time, you will have to
select the desired language and set the correct time.
3. Select "Traditional" and then "Conventional."
4. Set the temperature.
5. Press START.
If oven(s) does not operate, check the following:
Household fuse is intact and tight; or circuit breaker has
not tripped.
Electrical supply is connected.
See "Troubleshooting" section in the Use and Care
Guide.
6. When oven has been on for 5 minutes, feel for heat.
If you do not feel heat, turn off the oven and contact a
qualified technician.
7. To set oven functions, refer to the Use and Care Guide.
If you need Assistance or Service:
Please reference the "Assistance or Service" section of the
Use and Care Guide, or contact the dealer from whom you
purchased your built-in oven.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ywos52es4mWod52es4m

Table des Matières