Cleaning; Storage; Disposal/Environmental Protection; Spare Parts/Accessories - Parkside PHA 12 A1 Traduction Des Instructions D'origine

GB IE
sole (7) that does not contain the
V-groove.
5. Using the screws (16), align the blade
(17) to the centre of the blade holder
(14) and fl ush with the part of the pla-
ner sole (7) that does not contain the
V-groove.
6. Tighten the blade holder (14) and bla-
de (17) in the centre of the planer shaft
using the nuts (15).

Cleaning

Always remove the recharge-
able battery before carrying
out work on the device.
Risk of injury!
• Clean the housing with a dry cloth or
paint brush.
Do not clean the blade using water, cle-
aning agents or sharp objects.
• Clean the ejection chute (
using an appropriate tool (e.g. a piece
of wood, or using compressed air).

Spare Parts/Accessories

Spare parts and accessories can be obtained at www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone
(see "Service-Center" Page 28). Please have the order number mentioned below ready.
Position
Operating instructions
11
12
9+10
17
26

Storage

Store the device in a dry place, out of
reach of children.
Disposal/environmental
protection
Remove the battery from the device and
recycle the device, battery, accessories
and packaging in an environmentally-fri-
endly manner.
•
8) regularly
•
Name
Shavings extraction adapter
Shavings ejector
Allen key + Spanner
Planer blades
Electrical devices do not belong in
domestic waste.
Take the device to a recycling plant.
The plastic and metal parts used on
your appliance can be properly sorted
according to materials and grades
and effi ciently recycled. Please contact
our service centre for more informati-
on.
We will dispose of any defective de-
vices that you send to us free of char-
ge.
Order no.
91105331
91105332
91105333
91105334