Changing The Application Tool; Operation; Switching On / Off; Selecting The Oscillation Speed - Parkside PAMFW 10.8 A1 Instructions D'utilisation Et Consignes De Sécurité

Start-up / Operation / Maintenance and cleaning / Warranty

Changing the application tool

(see Fig. G)
DANGER OF INJURY!
Always remove the battery from the
unit before working on the power tool.
R emove any tool already inserted. To do this,
release the clamping screw
key and take off the tool.
10
P lace the tool (e.g. plunge saw blade
the tool mount.
NOTE: You can place the tool in any of the
possible positions on the tool mount.
F asten the tool in place with the clamping
screw and clamping plate.
7
Tighten the clamping screw
key .
10
C heck that the tool is firmly seated.
Incorrectly or insecurely attached tools could
become lose during use and injure you.

Operation

Switching On / Off

Q
S lide the ON / OFF switch
on the device.
S lide the ON / OFF switch
switch off the device.

Selecting the oscillation speed

Q
P reselect the required oscillation speed using
the oscillation speed setting wheel
NOTE: The required oscillation speed depends on
the material and the working conditions and can be
determined by means of a practical test.

Maintenance and cleaning

Q
DANGER OF INJURY!
Always remove the battery from the
unit before working on the power tool.
12 GB/IE
All manuals and user guides at all-guides.com
using the Allen
7
) on
13
using the Allen
7
Note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
Q
The warranty for this appliance is for 3
years from the date of purchase. The ap-
forwards to switch pliance has been manufactured with care
1
and meticulously examined before deliv-
ery. Please retain your receipt as proof
backwards to
1
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
. The warranty covers only claims for material and
3
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering
not carried out by our authorized service branch. Your
statutory rights are not restricted in any way by this
warranty.
D o not use sharp objects for cleaning the device.
Do not allow any liquids to enter the device.
Otherwise the device could be damaged.
C lean the device frequently; for best results, do
this immediately after you have finished using it.
U se a dry cloth to clean the housing – under
no circumstances use petrol, solvents or clean-
ing agents that attack plastic.
A vacuum cleaner is required to thoroughly clean
the device.
V entilation openings must always be kept free.
R emove any adhering dust with a narrow paint
brush.
When storing a lithium-ion battery for extended
periods, regularly check the charge. The optimal
charge is between 50 % and 80 %. The optimal
storage climate is cooling and dry.
Warranty