Preset Time; Changing The Preset Time; Aborting A Time-Delay - Brandt WFH 1481 D Guide D'installation Et D'utilisation

Preset time

With the Preset time function you can de-
lay the programme start.
A
When doing so, do not use liquid de-
tergent! Risk of staining of the textiles.
3 You set the time the programme
should be completed ; the appliance
calculates the start time.
Important: the clock must be set to
the correct time (see above).
Here's how:
1. Open tap, load drum and fill in deter-
gent.
2. Select programme, select additional
functions and spin speed, if necessary.
3. Turn button »End of wash«
the desired time is set.
1200
• Do not press the »Start/Pause«
button. The programme will start au-
tomatically. On the display the mes-
sage
" Cycle starts in ... " is shown.
3 During the time-delay period more
laundry can be loaded.

Changing the preset time

The preset time setting can be changed
even after the time-delay period has started:
• Turn button »End of wash«
the desired time is set

Aborting a time-delay

An active time-delay function can be
aborted at any time:
1. Set the programme selector to »Stop«
and wait approx. 2 seconds.
2. Then set the programme selector to
the desired programme again.
3. Press the »Start/Pause«
start the programme.
G
58
, until
End 20:30
, until
button to
Programme duration
The actual duration of a programme cycle
depends on the selected programme and
the activated additional functions for this
programme.
3 The details in the table "Technical data
and consumption figures" refer to pro-
grammes without additional func-
tions.