Additional Functions/Options; Buttons; Pre-Wash; Intensive - Brandt WFH 1481 D Guide D'installation Et D'utilisation

Additional functions/options

Buttons

3
Depending on the selected pro-
gramme (see "Programme Table"),
specific additional functions can be ac-
tivated by pressing a button.
• Press the required buttons before
starting the programme.
• Any combination of functions not sen-
sible can not be selected; a buzzer
sounds a warning.

Pre-wash

This button activates a pre-wash, which is
made at a temperature of 40 °C.
• A pre-wash is only worth while with
heavily soiled laundry.
Without pre-wash you save energy,
water, washing detergent – and time.

Intensive

This function extents the wash time of the
main-wash cycle. The washing detergent
can work more effective, you can wash at
lower temperatures – and thus save up to
35% on energy.
• Normal soiled laundry that can be
boiled you can now wash at 60 °C in-
stead of 95 °C, plus this button.
• Normal soiled easy-cares you can
wash at 40 °C instead of 60 °C, plus
this button.
G
56

Extra rinsing

This function includes an extra rinse cycle.
• Use this function only if you are sensi-
tive to washing detergent residue.
The increased water consumption is a
burden on the environment – and
your purse.
• If the foam detection system detects
an overdose of washing detergent, an
extra rinse cycle is included automati-
cally .

Short programme

With this button the wash time is short-
ened.
• Use this function for small loads or less
soiled laundry.

surfliss (crease protection)

When this button is pressed, the drum ro-
tation is reduced and spinning limited to
reduce creasing. In addition, the washing
is done at a higher water level.
• Use this function only for delicate fab-
rics which crease easily.
A
The maximum load capacity then is
– for cottons: .......................... 3.0 kg
– for easy-care: ....................... 1.5 kg
– for delicates: ........................ 1.0 kg

Bio

If you activate this function, the laundry is
soaked for about an hour before the wash
cycle starts.
• Use this function if heavily soiled and
for stains such as protein, blood or co-
coa.

Rinsehold

If you press this button, the programme
stops after the last rinse cycle. The laundry
remains in the water (to protect against
creasing).
• Once the rinsehold is reached, the in-
dicator lamp begins to flash.
• Refer to "At a glance", to find out what
is to be done at this point.