Brandt WFH 1481 D Guide D'installation Et D'utilisation page 64

Message (examples)
Warning messages:
Open tap and press start
Door open: washing cycle
interrupted
Unable to set current time
Option unavailable (on ...)
Action unavailable (at this moment)
Delay start on
Unable to change cycle: select stop
or ...
Cycle locked: return to ...
Too much detergent (extra rinse
added)
Door locked, selector on OFF
Recycling filter needs cleaning
Fault messages:
Clean pump filter or drain hose
Please call After-Sales Service,
Fault 000
Fault with locking door system
Controls test
Service check
G
62
Meaning & remarks
no water intake
e.g. when adding more laundry
programme is already running
button not selectable or programme already
running
combination of buttons not selectable
do not press Start with activated delay-timer
function
change of programme not possible – switch
appliance OFF or return to the running pro-
gramme
child-proof lock activated – return to the
running programme
info at running programme / at programme
end
if door can not be opened, even after the
waiting time
every 40 wash cycles, see "Care and mainte-
nance"
3 Water discharge blocked, see "Care and
maintenance"; or too much foam.
3 Switch appliance off, unplug the power
cable, wait two minutes, plug in again.
If faults persists: contact customer serv-
ice and describe the fault.
Message for customer service
Message for customer service