Siebert S202 Série Manuel D'utilisation page 38

Display test
In menu item F one can set whether a display test is automatically carried out after
power-on.
The display test can be also activated via the serial interface with the following
command:
Display test on: $T1
Display test off: $T0
Display test has priority over blanking and the flash function.
Demo operation mode
If in menu item F the setting PlAy is selected, random characters are displayed
one after another. A control of the unit is in this operation mode not possible.
Flashing
The flashing function is activated with the following command:
Flashing on: $F1
Flashing off: $F0
If $F1 is transmitted in the data string, the subsequent characters flash until the end
of the data string or until $F0 is transmitted in the data string.
Blanking
The display can be blanked with the following command:
Blanking on: $B1
Blanking off: $B0
Blanking has priority over the flash function.
38 BAL S202 SER M 1.0