Seca 956 Mode D'emploi Et Garantie page 14

1. Congratulations!
By purchasing the seca 956 electronic
chair scale, you have acquired a highly-ac-
curate and sturdy piece of equipment.
seca has been putting its experience at
the service of health for over 150 years
now, and as market leader in many coun-
tries of the world, is always setting new
standards with its innovative develop-
ments for weighing and measuring.
In accordance with national regulations, the
seca 956 wheelchair scale with standing
aid is used primarily in hospitals, doctors'
surgeries and in-patient nursing facilities.
The scale is a Class I medical product, and
has been calibrated in accordance with
the precision class III.
Weight is determined within a few
seconds.
2. Safety
Before using the new scale, please take a little time to read the following safety instructions.
Warnings
• Never use the seca 956 chair scale for
transport purposes. Do not use
seca 956 chair scale to transport peo-
ple or objects. If you transport people
or objects using the chair scale, there is
an acute risk of injury.
• Never place the seca 956 chair scale
on sloping surfaces. The brakes on the
casters could be released.
• Prevent the scale from rolling away ac-
cidentally. Use the wheel brake when
the patient is sitting down or getting up
14
The seca 956 can be moved on casters
and its low power consumption means it
will provide mobile service for a long peri-
od.
The seca 956 chair scale is made for peo-
ple who are not especially steady on their
feet. To give you a safe feeling while
weighing, the chair scale has a solid tubu-
lar frame and a firmly bolted seat. The free-
running casters make the scale very easy
to move. The wheel-locking lever, together
with the swiveling armrests and foot sup-
ports, makes it easier to sit in safety.
The scale is of a very sturdy construction
and will give you long and loyal service. It
is easy to operate and the large display is
easy to read.
and assist people who are unsteady on
their feet.
Notes
• Follow the safety instructions in the in-
struction manual.
• Keep the operating manual and the
declaration of conformity contained
therein in a safe place.
• Have scale serviced and re-calibrated
on a regular basis (see "Servicing/recal-
ibration" on page 21).
• Use only the type of battery stated (see
"Unpacking" on page 15).