Specifications; Maintenance - Briggs & Stratton ELITE Série Manuel D'utilisation

PRODUCT SPECIFICATIONS
AC Frequency: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Hz
Rated AC Voltage: . . . . . . . . . . . . . . . . . 120 volts, single phase
Running Horsepower: . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 HP
Pump Type: . . . . . . . . . . . . . . . . . . Oil Lubricated Direct Drive
Lubricant:. . . . . . . . . . . . . . . . . . . . . . . . . SAE 5W50 Synthetic
Oil Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . 7.168 oz. (200ml)
Air Delivery:
at 40 psi:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 CFM
at 90 psi:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 CFM

MAINTENANCE

To ensure efficient operation and longer life of the air
compressor, prepare and follow a routine maintenance
schedule.The routine described in this section is intended for
an air compressor used under normal daily working
conditions. If necessary, modify the schedule to suit the
conditions under which you use your compressor.
Modifications will depend upon hours of operation and
Maintenance
Schedule
Maintenance Task
Check Safety Valve
Check Fittings/Valves
Check Oil Level
Clean Unit
Check Air Filter
Change Pump Oil
Check Intake and
Exhaust Valves
Check Safety Labels
Overload RESET
Service Intervals
Every 50 Hours
Daily Weekly
or Yearly
X
X
X
X
X
* Change oil after first 100 hours of operation, then every 300 hours thereafter.
** Inspect annually. Return unit to approved repair center if part requires replacement.
*** Inspect annually, replace as necessary
SPECIFICATIONS / MAINTENANCE
Cut-In Pressure Setting: . . . . . . . . . . . . . . . . . 80 psi (5.6 bars)
Cut/Out Pressure Setting: . . . . . . . . . . . . . . 125 PSI (8.7 bars)
Tank capacity: . . . . . . . . . . . . . . . . . . . . . . . . . 4 Gallons (15 L)
Tank Style: . . . . . . . . . . . . . . . . . . . . . . . . . . Twin Stack Vertical
Recommended Air Hose Size: . . . . . . . . . 3/8 inch ID (14mm)
Air Fittings: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 inch NPT
Quick Connect Fitting Type: . . . . . . . . . . . . . . . . . . . . . . . . I/M
Operating Temperature Range: . . . . 32° to 97°F (0° to 35°C)
Shipping Weight:. . . . . . . . . . . . . . . . . . . . . . . . . 62 lbs. (28 Kg)
working environment. Operating air compressors in
extremely dirty or hostile environments will require more
frequent maintenance checks.
NOTE: See Operation section for control locations.
Follow the hourly or calendar intervals, whichever occurs
first:
Every 100 Hours
or Yearly
X*
X**
X***
X**
Service Dates
Fill in as you complete
regular service
11