ESAB TXH 121 Manuel D'instructions page 28

Masquer les pouces Voir aussi pour TXH 121:
Table des Matières

Publicité

ACCESSOIRES
0368 846 881
Accessory kit for;
TXH 151, 151r, 151F, 151 Fr, 151V,
201, 201r, 201V, 201F, 201 Fr
0368 846 882
Accessory kit for;
TXH 401w, 401wr, 401w HD, 401wr HD
0463 349 101
Contains:
1 Back cap, short
2 Collet, 1.6 mm (0.063 in.)
1 Collet, 3.2 mm (0.126 in.)
2 Collet body, 1.6 mm (0.063 in.)
2 Collet body, 2.4 mm (0.094 in.)
2 Collet body, 3.2 mm (0.126 in.)
2 Heat shield
1 Gas nozzle, 6.4 mm (0.252 in.)
3 Gas nozzle, 8.0 mm (0.315 in.)
3 Gas nozzle, 9.8 mm (0.386 in.)
2 Gas nozzle, 11.2 mm (0.441 in.)
1 Gas nozzle, 12.7 mm (0.500 in.)
1 Gas lens, 1.6 mm (0.063 in.)
1 Gas nozzle, 8.0 mm (0.315 in.)
1 Valve stem
2 O-ring
2 O-ring for valve
Contains:
1 Back cap, short
1 Collet, 1.0 mm (0.039 in.)
4 Collet, 1.6 mm (0.063 in.)
3 Collet, 2.4 mm (0.094 in.)
1 Collet, 2.4 mm (0.094 in.)
1 Collet, 3.2 mm (0.126 in.)
2 Collet body, 0.5 mm (0.020 in.)
2 Collet body, 0.5–2.4 mm
(0.020–0.094 in.)
3 Heat shield
1 Gas nozzle, 6.4 mm (0.252 in.)
1 Gas nozzle, 8.0 mm (0.315 in.)
2 Gas nozzle, 9.8 mm (0.386 in.)
3 Gas nozzle, 11.2 mm (0.441 in.)
3 Gas nozzle, 12.7 mm (0.500 in.)
1 Gas lens, 2.4 mm (0.094 in.)
1 Gas lens, 3.2 mm (0.126 in.)
1 Heat shield
2 O-ring
- 28 -
© ESAB AB 2017

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Txh 151Txh 201Txh 251Txh 252Txh 401

Table des Matières