Applications; Safety Instructions; General Safety Instructions - Festool SSU 200 EB Notice D'utilisation D'origine

[2-6] Tension bolt
[2-7] Clamping bolt
[2-8] Chain sprocket
[2-9] Chain adjustment wheel
[3-1] Clamping lever for reverse tilt lock
[4-1] Cut indicator for 0°
[4-2] Hand screw for cutting angle adjustment
[4-3] Bevel indicator
[4-4] Cut indicator for 45°
[4-5] Cut indicator for 60°
[4-6] Cut profi le indicator for 0°
[5-1] Oil level indicator
[5-2] Oil feed adjuster
[6-1] Distance screws
[7-1] Guide rail
[7-2] Gripper
[7-3] Angle adjuster
[7-4] Connecting spring
[7-5] Quick clamp
[8-1] Safety snap ring
[8-2] Washer
[8-3] Chain sprocket
[8-4] Spindle
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
4

Applications

4.1 Description
The SSU 200 EB sword saw was developed for
multi-purpose carpentry work. The machine can
make rectangular cuts and adjustable angle cuts
to a depth of 200 mm. Various types of chains al-
low you to select the right tool for the job. A cut-
ting angle as large as 60° can be set quickly and
precisely using two tilting segments and a clearly
legible bevel indicator. The machine is equipped
with a pull-out guide ruler that can be placed
on either side of the runner and guarantees a
straight, accurate cut.
The guide bar can be quickly tilted back 10°. Chain
tension can be comfortably adjusted using a wheel
that is easily accessible from the main handle. A
suitably shaped port for routing away sawdust
keeps the machine clear and can be attached to
a suction hose. During cutting, the chain receives
optimal lubrication from the oil feed pump. Once
turned on, the motor runs smoothly up to maxi-
mum RPM, thanks to an electronic control unit.
The motor is electronically protected. In the event
22
of an accidental overload, it switches off automati-
cally. If overloaded for a longer period, it switches
to "cooling mode", during which the machine runs
at a low cooling RPM, and once cooled, it returns
to the normal operating mode. When the machine
is turned off, an electric brake activates, which
signifi cantly shortens the machine's run-down
time. Depending on the usage, this run-down time
may vary considerably.
4.2 Tool properties
The SSU 200 EB sword saw is designed for trans-
versal and shorter longitudinal cuts in dense,
solid wood and similar materials. The machine
is operated by a person who holds and guides
it using designated handles; the basic grip is by
the front auxiliary handle and the main handle.
Holding the rear auxiliary handle is only permit-
ted if there is no danger of kickback. Any other
usage of this machine is considered improper. The
machine is not designed for felling or trimming
trees or bushes! The manufacturer of the ma-
chine is not responsible for any damages caused
by its improper use. Risks associated with such
use of the machine are borne solely by the user.
The specifi ed use of the machine also includes
conforming to the operational, maintenance and
repair conditions prescribed by the manufacturer.
This machine must not be operated by people un-
der 16 years of age.
5

Safety instructions

DANGER
All applicable rules concerning work safety, the
safety guidelines stated in the chapter Safety
Instructions, and all other generally applicable
health and work principles must be adhered to
without exception. The manufacturer is not liable
for any damages caused by unauthorised altera-
tions to this machine.
5.1

General safety instructions

WARNING!
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
Read all safety warnings