Table Des Matières - Nilfisk Advance Adgressor 3220D Mode D'emploi

A-2 / ENGLISH
TABLE OF CONTENTS
page
Introduction ........................................................................................... A-2
Cautions and Warnings ........................................................................ A-3
Know Your Machine .............................................................................. A-4
Control Panel ........................................................................................ A-5
Prepare the Machine for Use
Install the Batteries ............................................................................... A-6
Install the Brushes ................................................................................ A-7
Install the Squeegee ............................................................................. A-7
Fill the Solution Tank ............................................................................ A-7
Detergent (EcoFlex™) System ....................................................A-8 - A-9
Operating the Machine ....................................................................... A-10
Scrubbing ........................................................................................... A-10
Wet Vacuuming .................................................................................. A-11
After Use ............................................................................................. A-11
Maintenance Schedule ....................................................................... A-11
Lubricating the Machine ..................................................................... A-11
Charging the Batteries ........................................................................ A-12
Check the Battery Electrolyte Level .................................................... A-12
Squeegee Maintenance ...................................................................... A-13
Squeegee Adjustment ........................................................................ A-13
Side Skirt Maintenance ............................................................A-14 - A-15
Troubleshooting .................................................................................. A-16
Technical Specifi cations ..........................................................A-17 - A-18
INTRODUCTION
This manual will help you get the most from your Advance Rider Scrubber. Read it thoroughly before operating the machine.
Note: Bold numbers in parentheses indicate an item illustrated on pages A-4 - A-5.
This product is intended for commercial use only.
PARTS AND SERVICE
Repairs, when required, should be performed by your Authorized Advance Service Center, who employs factory trained service personnel, and maintains an
inventory of Advance original replacement parts and accessories.
Call the ADVANCE DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
MODIFICATIONS
Modifi cations and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user without prior
written approval from Nilfi sk, Inc. Unapproved modifi cations will void the machine warranty and make the customer liable for any resulting accidents.
NAME PLATE
The Model Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering repair parts
for the machine.
Date of Manufacture "Date Code" is also marked on the Nameplate. For example, Date Code "A17" = January 2017.
Use the space below to note the Model Number and Serial Number of your machine for future reference.
MODEL No. ____________________________________________________________
SERIAL No. ____________________________________________________________
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it
can be inspected. Contact the Advance Customer Service Department immediately to fi le a freight damage claim.
After removing the carton, cut the plastic straps and remove the wooden blocks next to the wheels. Use a ramp to roll the machine from the pallet to the fl oor.
revised 7/2018
A-2 - FORM NO. 56041988 - Adgressor , Adgressor EcoFlex
™ ™ ™