THOMSON GENI MIX PRO CONNECT THFP 50046 Manuel D'instructions page 51

SPEED
Press this button in stand-by mode or during working process
•
(except under some auto programs which the speed adjustment
function is locked), the appliance
mode. The signal on LCD flicker,
Turn the knob to select desired
Speed range from level 1-10.
•
Press this button in blending & heating process, if the temperature
•
setting or the actual temperature is over 60°C, the speed can be
only adjustable from speed 1 to 4. If it was working at high speed, it
will drop to speed 4 automatically.
There is a speed transfer on the structure, so it's normal to hear little
•
noise before the motor start working, or transferring the speed
between level 5 and level 6.
For crushing or chopping hard food or big volume of food, it is
•
suggested to select speed 5 first and then turn to speed 10, to
avoid vibration and achieve perfect performance.
TEMPERATURE
Press this button in stand-by mode or during heating process
•
(except some auto programs locked the temperature adjustment),
the appliance gets into temperature setting mode. The signal on
LCD flicker, then temperature is adjustable. Turn the knob
select desired temperature.
Temperature range: 37-120°C
•
DIY
There are three DIY programs, as to record memories for future use.
•
Press this button, and the signal
•
again, it will be selecting
When the DIY signal on LCD flickers, press and hold DIY button for 5
seconds, until the screen shows STEP:01(
desired program. The original recording is cleared in the meantime.
Set desired speed, temperature, timer and press DIY button again,
it comes to STEP:02 (
maximum STEP:20. It cannot come to next step if there is the time is
00:00:00. Hold DIY button again for 5 seconds to keep the setting in
memory.The recording cannot be reviewed or revised.
For using: Press DIY and select the desired DIY function, and press
•
START to start working as recorded.
During working of DIY program, the machine will stop for 10 seconds
•
and keep beeping to remind if it needs PAUSE and add ingredients.
If no operation during these 10 seconds, the machine goes to next
step according to the setting.
gets into speed setting
then speed is adjustable.
speed.
on LCD starts flicker. Press
among. For Recording:
); repeat until finish setting, up to
EN-19
)and can set the
to