THOMSON GENI MIX PRO CONNECT THFP 50046 Manuel D'instructions page 42

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instructions of use
HELPFUL USING HINTS:
1. It's normal that there will be some tiny motor smell in the first few
times use.
2. Error code (E01, E02, E03, E04, E05, E07, E11) is all for machine
protection code, it's normal, not fault. Please follow below
suggestion to clear it.
3. If the temperature setting or the actual temperature is over 60 °C,
the speed can be only adjustable from speed 1 to 4. If it was
working at high speed, it will drop to speed 4 automatically.
4. It's normal that there will stop and make noise when changing the
speed between level 5 and 6.
5. Please make sure the cover is closed properly for any program with
speed.
6. It's normal the machine will be a little vibrating with high speed,
please make sure the machine is working on flat table and away
from edge.
7. The cooking bowl is stainless-steel material and it may become hot
during cooking, prevent yourself from burning.
8. Tips for auto functions:
SOUPE/VELOUTE
(QUICK SOUP /
THICK SOUP)
HACHER
(CHOP)
MIJOTE1/MIJOTE2
SAUCE
(SAUTE / STEW
/STIR)
PETRIR
(KNEAD)
It's better to use butterfly
after blending is
stopped, the maximum
speed for using it is 4 and
cooking with the
measuring cup off, put
the cooking basket
upside down over the
measuring cup opening
to minimize food splatter.
For crushing or chopping hard food, meat or
big volume of food, it is suggested to select
speed 5 first and then turn to speed 10, to
avoid vibration and achieve perfect
performance.
Use butterfly or kneading blade can help to
avoid bottom burnt. The temperature is very
high, please be careful when you open the
lid.
Suggest to use kneading blade. The
maximum capacity for flour is 1kg, please pay
attention to the proportion of flour and water
to different food requirement.
EN-10

Publicité

Table des Matières
loading

Table des Matières