Introduction - RPB Z-LINK Mode D'emploi

INTRODUCTION

The RPB Z-LINK is approved as follows:
® ®
Powered Air Purifying Respirator - When used with the PX4 AIR PAPR unit to EN12941:1998
+A1: 2003 +A2: 2008 TH2.
Supplied Air Respirator to EN14594: 2005 Class 4B.
The Z-LINK is a multiuse respirator for a number of different applications where there is a need
®
for protection from airborne contaminants, eye/face protection and head protection; such as
grinding, construction and other industrial applications.
The Z-LINK is tested and certified for the following standards when marked:
®
Head protection to EN397: 2005
Eye and face protection to EN166: 2005
The Z-LINK has been designed for use in atmospheres that are NOT IMMEDIATELY
®
DANGEROUS TO LIFE OR HEALTH (IDLH).
The Z-LINK is approved for use with the following breathing air source:
®
03-901 RPB PX4 AIR Powered Air Purifying Respirator (refer to PX4 PAPR Instruction
®
Manual for instructions on setting up for use with the PAPR) EN12941:1998 +A1:
2003 +A2: 2008
03-101 RPB Constant Flow Control Device EN14594: 2005
®
WARRANTY
All RPB products are covered by a manufactures warranty of 3 months. The manufacturer
®
warranty covers defects in material, workmanship and does not cover damage caused by misuse
or abuse. RPB 's only obligation and your exclusive remedy shall be to repair, replace or refund
®
the purchase price of such parts or products upon the presentation of proof of purchase. Maximum
liability is in no case to exceed the value of the RPB
APPROVAL
The RPB
Z-LINK meets the requirements of the European Community Directive
® ®
89/686/EEC, (Personal Protective Equipment Device).
The RPB Z-LINK is approved as an EN12941: 1998 + A1: 2003 + A2: 2008 TH2 P R SL
® ®
and EN14594: 2005 Class 4B Respirator and the quality systems are approved under Article 11b
by:
INSPEC International (0194)
Salford University Business Park
56 Leslie Hough Way
Salford M6 6AJ
United Kingdom
4
product involved.
®