RPB Z-LINK Mode D'emploi page 20

DONNING AND DOFFING
DONNING YOUR HELMET
Once you have completed the set up, you are ready to fit your RPB Z-LINK Respirator. Firstly
® ®
check inside the helmet to ensure that it is free of dust, dirt or contaminates. Then open the
bottom of the cape or face seal, with the air flowing from the air source, put the respirator onto
your head. Pull the cape down or make sure the face seal is sealing around your face/neck, then
tighten the head harness ratchet to fit. Make sure the visor is securely latched.
DOFFING YOUR HELMET
When you have finished working, leave the work area wearing the respirator with air flowing
into the helmet. Once outside the contaminated area remove the respirator and power down the
PAPR.
20