Maintenance And Diagnosis Of Failures; Maintenance; Operations Counter; Spare Parts - Erreka VIVO-D201 Manuel De L'installateur

MAINTENANCE AND DIAGNOSIS OF FAILURES

1

MAINTENANCE


Before carrying out
operation, disconnect the device from the
power supply.
 Frequently check the installation in order to
detect any sign of deterioration. Do not use the
device if any repair or adjustment is necessary.

A record of all repairs and maintenance operations
must be kept. The owner of the facility must keep
these records safe.
2

OPERATIONS COUNTER

1 Press ENTER to access the main programming menu.
The display lights up and D1 flashes.
D1 D2 Parameter
ç 1
Operations carried out
3

SPARE PARTS

 If the device needs repairing, go to an
authorised assistance centre or manufacturer;
never try to repair it yourself.
any maintenance
D3 D4 Options or values
X X
Indicates the cycles completed, multiplying the indicated figure
by an amount, for example:
68
6.8
Every six months
1 Check that the operation and safety devices
(photocells or safety strips), as well as their
installation, have not suffered any damage from the
weather or external agents.
2 Check the operation of the flashing light.
3 Check the device for normal operation.
2 Press the buttons ^ and
ç.

D3 and D4 show the number of operations
completed (see the table).
3 Press ESC to return.
indicates 6,800 cycles completed
indicates 68,000 cycles completed
 Use only original spare parts.
until D1 shows the letter
V
VIVO-D201 Control board
English
65