Install The Refrigerator - Norcold DCL4 Série Manuel D'utilisation Et D'installation

Install the Refrigerator

The refrigerator should be installed only on a solid surface in the vehicle.
1. Align the mounting rails on the bottom of the refrigerator [1] with the mounting
rails on the bottom of the refrigerator enclosure [2] (See Art01652).
2. Carefully push the refrigerator completely into the enclosure.
3. Open the door of the refrigerator.
4. Align the hole in the mounting rail on the bottom of the refrigerator and the hole in
the mounting rail on the bottom of the refrigerator enclosure.
5. Put the mounting screw down through the opening [3] in the bottom trim of
the refrigerator (See Art01651).
Make sure that the mounting screw is not cross-threaded in the
NOTICE
mounting flanges. Cross-threading will damage the mounting
flange and/or the screw.
6. Turn the mounting screw down into the mounting rails.
7. On DC L4XXX models, put a mounting screw through the two holes [4] in the
left-hand trim.
8. Tighten all of the mounting screws.
Installation and Owner's Manual 12
1
4
1
Art01651
2
Art01652
3