Barcode Management; Carticle List Screen - Cassese MACH 4 UNI Mode D'emploi

USER MANUAL
Keyboard configuration:
When recording an
article file, a
keyboard can be
used to enter the
reference. If you
don't need
alphanumeric
references it is
possible to get only
a simple numeric
keyboard. Press
KEYBOARD
ALFANUM button
to configure it.
6.B.l Page 6: barcode management:
If you are using a barcode reader, you can configure the type of barcodes that the
machine will accept. It can accept barcodes from older machine such as cs486 or
cs3099 and of course barcodes that were created for a cs4008. This option is useful if
you had these machines and don't want to modify your edition software. For example
selecting the BC 486 option, will allow using the old barcodes of a CS486ultra, but the
machine will not show the accessories to be used (such as spacer bars, type of top
clamp) as the CS486 didn't have that feature.
Touch the button BC4008 and set it to the required value.
All MACH 4 UNI are ready to be plugged to a barcode reader, but it is strongly recommended to buy
the scanner from Cassese to avoid compatibility issues. The barcode plug is a serial port located under
6.C ARTICLE LIST SCREEN:
From the main
menu, select
ARTICLES LIST.
This menu will be
used to display the
article list in the
memory of the
machine.
When
NUM is selected only
that simple keyboard
will be displayed for
referring an article.
Figure 6-35
the control panel.
The left column is
showing the first 10
references
memory
machine.
Press -10 or -100 to
scroll down of +10
or +100 references
of the list.
Figure 6-38
KEYBOARD
in the
of the
MACH 4 UNI
Figure 6-36
Figure 6-37
Figure 6-39
37