Configuring The Manual Mode; Reading Input/Outputs; Database Management - Cassese MACH 4 UNI Mode D'emploi

USER MANUAL
6.B.i Page 3: configuring the manual mode
The manual mode consist in pressing the pedal to get the clamp activation and then
press once the stapling button to launch the complete stapling sequence of the
corner.
It is possible to set the manual mode to a more detailed sequence. The operator will
then have to use stapling button at each position of wedge, this allowing a better
quality control for special jobs.
You will be asked for the code 9059 to be able to set that parameter. Once the setting
is done, turn off the machine to lock back the parameters.
6.B.j Page 4: Reading input/outputs
This page his helpful to check if a component of the machine is working.
Left column is dedicated to input signals, yellow background will come on when
activated.
Right column is dedicated to outputs, red background will come on when activated.
This page is real time visualization, it is possible to achieve it while launching a
stapling.
6.B.k Page 5: database management
The database of the machine can store up to 2990 files. This page is dedicated to its
management. Any action in this page, due to the volumes of datas, will take up to 15
minutes during which the machine can 't be used. It is possible to reduce the
database sizing to reduce this time. If you know you don't have more then 500 files
for example, then enter 500 in the field DATABASE SIZE, this will reduce the
necessary time for treatment.
Once you are done with the database management, do not forget to put it back to
2990 or the machine will not be able to store the 2990 files and the "full memory"
message will be displayed.
You will be asked for the code 0721 to be able to set that parameter. Once the setting
is done, turn off the machine to lock back the parameters.
Classifying the references:
The machine is storing a new file in the first free location of its memory. It means you
might not have a A to Z classification, depending of the order you have been
creating/deleting your files.
To classify your files in a A to Z order, press the SORT DATABASE button. Refer to
procedure of Figure 6-23 prior to launch this procedure in order to reduce the
treatment time.
You will be asked for a code, enter 0721 to get access to that function. Once the setting
is done, turn off the machine to lock back the parameters.
MACH 4 UNI
Figure 6-21
Figure 6-22
Figure 6-23
Figure 6-24
34