Isimple Screen: Review Of All Buttons; Juse Of Regulators - Cassese MACH 4 UNI Mode D'emploi

USER MANUAL
5.I SIMPLE SCREEN: REVIEW OF ALL BUTTONS
This screen will display positions one by one.
Alarm messages
Position in
millimeters
Move head
forward
Move head
backward
Quantity of cycles
done
5.J USE OF REGULATORS
On the side of the machine are located two regulators.
When using the machine, if a very soft moulding is joined, it is possible to reduce the
pressure of the clamps with the regulator CLAMP PRESSURE.
For that particular moulding it will also be possible to reduce the speed of the top
clamp, as it could leave a little mark on the moulding. Use the regulator PLUNGER
SPEED to adjust it.
Thanks to the sensors of the machine, 90% of the mouldings can be covered with this
regulators set at max value without having to set them.
Alarm messages lights, will turn to black background when active
Quantity of Vnails
Position number
Cycling time Select stapling speed
MACH 4 UNI
Return to main
menu
Manual mode
Automatic
mode
Reset cycle (for
example after
jamming)
Figure 5-52
29