Periodic Maintenance Table - Mi-T-M GEN-3200-iMS0 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE SCHEDULE

PERIODIC MAINTENANCE TABLE:

The maintenance schedule indicated in the table is based on the normal generator operation. Should the
generator be operated in extremely dusty condition or in heavier loading condition, the maintenance intervals
must be shortened depending on the contamination of oil, clogging of filter elements, wear of parts, and so on.
Maintenance
Items
Clean generator and
check bolts and nuts.
Check and refill
engine oil.
AC receptacles
DC terminal
Engine switch
Check Multi Monitor
Clean air element.
Clean spark plug.
Change engine oil. *
Spark arrester
Replace air element.
Clean fuel filter.
Clean and adjust spark
plug and electrodes.
Replace spark plug.
Remove carbon from
cylinder head. **
Check and adjust valve
clearance. **
Clean and adjust
carburetor. **
Overhaul engine **
Rotor
Stator
Replace engine mount
Replace fuel lines
* NOTE: Initial oil change should be performed after the first twenty (20) hours of operation. Thereafter, change oil every
hundred (100) hours. Before changing oil, check for a suitable way to dispose of old oil. Your local zoning or
environmental regulations will give you more detailed instructions on proper disposal.
**NOTE: As to the procedures for these items, contact your authorized Mi-T-M Customer Service Representative.
Operator's Manual
Every 8
Every 20
hours (Daily)
hours
(Refill daily up to upper level)
(Initial)
Service
Every 50
Every 00
hours (Weekly)
hours
Every 200
Every 500
hours (Monthly)
hours
Every 000
hours
Yearly
35

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Gen-4300-ims0

Table des Matières