Precautionary Measures; Connecting The Hob To The Mains Power - Blaupunkt 5RZ34410 Mode D'emploi

Never allow the attachment brackets to touch the insides of the worktop after installation (cf. image).

8.3 Precautionary measures

1. The ceramic hob must be installed by qualified personnel or a technician. We can provide you with
the names of suitable technicians. Please never complete this work yourself.
2. The ceramic hob may not be mounted beside refrigerators, dishwashers or rotary dryers.
3. The ceramic hob must be installed so that heat radiation is ensured, guaranteeing its reliability.
4. The wall and heating zone above the worktop must be able to withstand the heat.
5. To avoid damage, the sandwich layer and glue must be heat resistant.
6. Steam cleaners may not be used.
7. This ceramic hob may only be connected to a power supply with an impedance of 0.427 Ohm.
Contact your utility company if necessary for more information on impedance.

8.4 Connecting the hob to the mains power

The appliance should be connected to the power supply according to the relevant standards or using a
single pole disconnector. The connection is illustrated in the following.
1. If the cable is damaged or needs to be replaced, this should be handled by a customer service
technician with the correct tools, to avoid accidents.
2. If the appliance is connected directly to mains power, a single pole disconnector must be installed
with a minimum distance of 3 mm between the contacts.
3. The technician must ensure that the electrical installation is completed correctly and that safety
regulations are observed.
4. The cable may not be bent or compressed.
5. The cable must be checked regularly and may only be replaced by a qualified individual.
44