Drainage Connection - Vortice VORT INVISIBLE MINI Notice D'emploi Et D'entretien

ENGLISH

Drainage connection

The condensate drain can be made by connecting two flexible pipes with an internal diameter of approximately
16 mm to the drains. To prevent the formation of air bubbles, it is necessary to create a siphon with the tube
that comes out of the drain identified with number 1 on the appliance, as indicated in fig.3C
Diagonally cut the tube termination.
Note
It is necessary to make the siphon, respecting the dimensions indicated in fig.3D otherwise the regular
operation of the appliance is not guaranteed.
The condensate drain can also be made using the house sewage system.
3A
1
3C
1
OK
36
2
2
3B
1
NO
3D
2
∆
h > 50 mm
≥ 60 mm