3 RECEIPT OF GOODS
3.1 Checking the equipment
Check the unit for any damage or missing components upon delivery.
Note any damaged or missing parts on the delivery slip.
IMPORTANT:
You must notify the carrier of any damage and/or missing parts by registered letter within three days
of the delivery date.
Furthermore, ensure the unit is not stored in an outdoor location exposed to the elements.
3.2 Identifying the equipment
• Name plate:
Each unit has a manufacturer's name plate (A) bearing the unit's identification number (serial
number) and description.
Make sure this information matches that on the order.
Markings (name plate, punch marks, labels) must remain visible. They must not be altered, removed or modified.
Key:
- Désignation/Description: Unit type.
- An(Year): Year of manufacture.
- N° série/Serial No.: Production number. (to be quoted in all
correspondence)
- Refrigerant: Type of refrigerant.
- Refrigerant kg/TeqCO2: Refrigerant content in kg and in
tonnes of CO2 equivalent.
- BP/LP Mini/PSM/MOP: For the low pressure circuit:
- BP/LP. Mini = Minimum operating pressure in bar.
- PSM/MOP = Maximum standard pressure in bar (SP
according to PED 2014/68/EU).
- HP Maxi PSM/MOP: For the high pressure circuit:
- HP. Maxi. = Maximum operating pressure in bar.
- PSM/MOP = Maximum standard pressure in bar (SP
according to PED 2014/68/EU).
- kW Absorbee/Input kW: Power input in kW.
- Tension/Voltage: Power supply.
- Intensité/Current: Nominal current in A.
- Pression/Pressure Test: See "Pressure and temperature" section on the previous page.
- Poids/Weight kg: Operating weight of the unit, in kg.
- Min/Max Temperatures: See "Pressure and temperature" section on the previous page.
- IP: Machine electrical protection rating.
- No CE: Notified Body number.
Please include the identification number in all correspondence with CIAT.
4 SAFETY INSTRUCTIONS
To avoid any risk of accident during installation, start-up and
adjustments, the following equipment specifics must be taken
into account:
- Pressurised refrigeration circuits
- Presence of refrigerants
- Presence of electrical voltage
Only experienced and qualified persons may work on such
equipment.
The recommendations and instructions in this manual and on
each drawing provided with the unit must be followed.
In the case of units with pressure equipment or components, we
recommend that you contact your professional organisation for
5 MACHINE COMPLIANCE
Refer to the "Declaration of conformity" document supplied with your equipment.
6 WARRANTY
The warranty is effective for a period of 12 months from the date the unit is first commissioned into service provided said date
occurs within three months of the invoice date.
It is effective for a period of 15 months from the unit invoice date in all other cases.
NOTE: Refer to our general terms and conditions of sale for further information.
Ref. produit/Item Nbr
3025277.286282
An(Year)
N. Serie/Serial Nbr
No Produit
02438040/0001
Refrigerant
R410A
Refrigerant kg / TeqCO2
13.5 + 14.0 / 28.2+29.2
BP/LP Mini
PSM/MOP
2.5 BAR / 29.5 BAR
HP Maxi PSM/MOP
42 BAR / 42 BAR
Contient des gaz fluorés à effet de serre / Contains fluorinated greenhouse gases
30, av Jean Falconnier
01300 CULOZ (FRANCE)
Tél.: 33-(0)4-79-42-42-42
information on the regulations that apply to operators or owners
of pressure equipment or components. The characteristics of
this equipment/these components are given on the name plate
or in the regulatory documentation supplied with the products.
A fire protection device is fitted as standard on all units.
IMPORTANT: Make sure the main disconnect switch in the
unit's electrical panel is in the OFF position before working on
the unit.
EN - 3
power
DYNACIAT
Designation/Description
LG 1200V R410A
kW Absorbee/Imput kW
Service/Working
46.6
1088
Tension/Voltage
Temperature Min/Max
3 50HZ 400V
CF NOTICE
Intensite/Current A
IP
140
21
Pression/Pressure Test
No CE
PT=3XPS CF NOTICE
0060
www.ciat.com
Made in Franc e
A
EN
kg