Ryobi RBC430SESD Manuel D'utilisation page 21

Masquer les pouces Voir aussi pour RBC430SESD:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
English (Original instructions)
Rotational direction and maximum
speed of the shaft for the cutting
attachment.
Wear non-slip safety footwear when
using this equipment.
Wear non-slip, heavy duty gloves.
Do not smoke when filling fuel tank.
Use unleaded petrol intended for
motor vehicle use with an octane
rating of 91([R+M]/2) or higher.
Use 4-stroke lubricant for air cooled
engines.
Open the oil dip stick, pour 65 ml
20W-50 fresh oil with funnel.
Squeeze the throttle lock and throttle
trigger to run.
Pull: Quick release tab
To stop the unit: Place the ignition
switch to the "O" position.
Ukrainian mark of conformity
Conforms to all regulatory standards
in the country in the EU where the
product is purchased.
Run position.
Full Choke position.
Half Choke position
Keep hands away from the blades.
Fully press and release the primer
bulb 10 times.
Pull the starter rope.
Lock the throttle in position by
depressing the throttle interlock
button.
Squeeze throttle trigger to start/run.
Wait for 10 seconds.
EurAsian Conformity Mark
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if
not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if
not avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property
damage
DESCRIPTION
1. Shoulder strap
TM
2. Tri-arc
Blade
3. Drive shaft
4. Coupler
5. Strap hanger
6. Ignition switch
7. Trigger lock
8. Rear handle(RBC430SESD only)
Left handle( RBC430SBSD only)
9. Primer bulb
10. Fuel cap
11. Recoil starter
12. Throttle trigger
13. Latch
14. Knob
15. Front handle (RBC430SESD only)
Trigger handle (RBC430SBSD only)
16. Blade guard
17. Choke lever
18. Grass defl ector
19. Cutting line
20. ReelEasy
string head
TM
21. Lock button
22. Guide recess
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rbc430sbsd

Table des Matières