STANNOL INDUSTA HF Série Manuel D'utilisation page 38

Operating instructiOns
Temperature too high.
● Tip temperature too high?
Reset the temperature.
● check temperature correction settings of soldering iron?
See: „Temperature Correction".
● refer to the service manual.
Filaments at solder tip or solder joint.
● Tip temperature too high?
Reset to appropriate lower temperature.
● Is solder tip clean?
„Maintenance of solder tips".
Tip temperature too low.
● Is solder tip clean and free of oxides?
See: „Maintenance of solder tips".
● check temperature correction settings of soldering iron?
See: „Temperature Correction".
Display shows .
H-E
● Is the soldering iron cord damaged?
Replace soldering iron.
● Is the soldering iron equipped with a solder tip?
Fit an appropriate tip.
● refer to the service manual.
38