STANNOL INDUSTA HF Série Manuel D'utilisation page 34

Operating instructiOns
cHoIce oF SoLDer TIpS
1. Choose a solder tip for maximum contact area, which can produce the most effective heat transfer,
so that the operator can produce solder joints as quickly as possible.
2. Choose a good path to transfer heat to the solder tip, the shorter length can get more precise
control of the temp of the soldering station, but to solder dense circuit boards you may need to
use a profile of solder tip.
FORM bevelled
A-0,8-hF A-1-hF
0,8 mm 1 mm
FORM chisel
M-1,2-hF M-1,6-hF M-2,4-hF
1,2 mm 1,6 mm
34
A-2-hF A-3-hF A-4-hF
2 mm 3 mm 4 mm
M-3,2-hF M-4,2-hF
2,4 mm 3,2 mm 4,2 mm
FORM Pencil
b-0,2-l-hF b-0,2-hF b-0,5-hF
0,2 mm 0,2 mm 0,5 mm
FORM KniFe
K-3-hF K-4,7-hF
3 mm 4,7 mm
b-1-hF
1 mm