Tips - VINCENT SV-228 Manuel D'utilisation

Burn in/ Warm up
Your audio components need a certain time period
until they reach maximum performance. The dura-
tion of this "warm up" time is very diffe-rent for
the various elements of your audio system. Higher
and homogeneous sound quality is achie-ved while
keeping the device switched on.
Your audio specialist dealer has enough experience to
give you more information.
Net frequency noise
Some audio source devices may in combination
with the amplifier cause a humming noise at po-
wer line frequency audible from your speakers.
Usually, its volume varies with the volume setting
of the amplifier. This is no sign of a defect or fault
of your audio products but has to be eliminated.
Generally, every wall-powered device connected
to the ground wire of the power plug can cause this
problem when connected to the amplifier.
Experience shows that this problem is mainly
caused by antenna-connected components (as
TV-sets or Tuners), personal computers, electrost-
atic loudspeakers, subwoofers, record players or
headphone amplifiers that are connected to the

TIPS

audio inputs of the amplifier. Another possible
reason for humming noise is electromagnetic in-
terference of other components' power supplies
with pick-up-systems of record players (change the
place of the record player for a test).
In most electric devices the ground potentials of all
signals are connected to each other at one central
point, where they have one common connection.
If the device uses the protective conductor of the
wall outlet, the corresponding wire of the line cord
is connected intractably to the metal housing of the
device. This is mostly the point where the central
grounding point is attached to. By doing this the
housing is able to shield all signals from external
radiated noise. Some main amplifiers are equip-
ped with a „Ground Lift" switch. If it is activated,
ground potential of the chassis and the protective
ground wire are being separated from the central
signal ground point. The protective ground wire
keeps its function. Sometimes this helps prevent
noise caused by errors in grounding.
If the problem occurs and cannot be solved by
yourself your audio specialist dealer will help you.
47