Tips - VINCENT SV-737 Manuel D'utilisation

Operation
Playback of music
through your wireless
networt (streaming)
picture 1
Burn in/ Warm up
Your audio components need a certain time
period until they reach maximum performance.
The duration of this "warm up" time is very diffe-
rent for the various elements of your audio system.
Higher and homogeneous sound quality is achie-
ved while keeping the device switched on.
Your audio specialist dealer has enough experi-
ence to give you more information.
Net frequency noise
Some audio source devices may in combination
with the amplifier cause a humming noise at
power line frequency audible from your speakers.
Usually, its volume varies with the volume setting
of the amplifier. This is no sign of a defect or fault
OPERATING THE APPLIANCE
Button(s) Description
WIFI
8. The SV-737 will be connected inside your network.
FUNCTION
9. You can connect to your Wifi-network again. After your will open the
(22)
Muzo-App the connection will be build up automatically.
picture 2

TIPS

of your audio products but has to be eliminated.
Generally, every wall-powered device connected
to the ground wire of the power plug can cause
this problem when connected to the amplifier.
Experience shows that this problem is mainly cau-
sed by antenna-connected components (as TV-sets
or Tuners), personal computers, electrostatic loud-
speakers, subwoofers, record players or headpho-
ne amplifiers that are connected to the audio
inputs of the amplifier. Another possible reason
for humming noise is electromagnetic interference
of other components' power supplies with pick-up-
systems of record players (change the place of the
record player for a test).
In most electric devices the ground potentials of all
signals are connected to each other at one central
point, where they have one common connection.
picture 3
43
Vincent