VINCENT SV-228 Manuel D'utilisation page 40

CONNECTION OF SOURCE DEVICES OVER
The integrated D/A converter makes it possible to receive also digital audio signals via an optical and/
or coaxial cable and to transmit them analogously to the amplifier. Here, the "Optical IN" and "Coaxial
IN" (12) connections serve as input.
Digital audio source with optical signal connection
Digital audio source with coaxial signal connection
This device is equipped with a switch (22) that can be used to change the country-specific voltage from
230 V to 110 V.
Please never actuate the switch during operation! The voltage must only be swit-
ched by a technician, since the device fuse must also be replaced after actuation of the
switch! Information about the device fuse can be found on the back of the device.
Unauthorised actuation of the switch will void any warranty claim!
40
OPTICAL IN AND COAXIAL IN
Optical digital cable
Coaxial Digital cable (RCA)
SWITCHING THE VOLTAGE
DVD, SACD, CD,
TV/Radioreceiver
DIGITAL OUT
DVD, SACD, CD,
TV/Radioreceiver
DIGITAL OUT