Tips - VINCENT SP-996 Manuel D'utilisation

Burn in/ Warm up
Your audio components need a certain time
period until they reach maximum performance.
The duration of this "warm up" time is very diffe-
rent for the various elements of your audio system.
Higher and homogeneous sound quality is achie-
ved while keeping the device switched on.
Your audio specialist dealer has enough experi-
ence to give you more information.
Net frequency noise
Some audio source devices may in combination
with the amplifier cause a humming noise at power
line frequency audible from your speakers. Usually,
its volume varies with the volume setting of the
amplifier. This is no sign of a defect or fault of your
audio products but has to be eliminated.
Generally, every wall-powered device connected
to the ground wire of the power plug can cause this
problem when connected to the amplifier.
Experience shows that this problem is mainly cau-
sed by antenna-connected components (as TV-sets
or Tuners), personal computers, electrostatic loud-
speakers, subwoofers, record players or headpho-
ne amplifiers that are connected to the audio

TIPS

inputs of the amplifier. Another possible reason for
humming noise is electromagnetic interference of
other components' power supplies with pick-up-
systems of record players (change the place of the
record player for a test).
In most electric devices the ground potentials of all
signals are connected to each other at one central
point, where they have one common connection.
If the device uses the protective conductor of the
wall outlet, the corresponding wire of the line cord
is connected intractably to the metal housing of
the device. This is in most cases the point where
the central grounding point is attached to. By
doing this the housing is able to shield all signals
from external radiated noise. Some main ampli-
fiers are equipped with a "Ground Lift"-switch. If
it is activated, ground potential of the chassis and
the protective ground wire are being separated
from the central signal ground point. The protecti-
ve ground wire keeps its function. Sometimes this
helps prevent noise caused by errors in groun-
ding.
If the problem occurs and cannot be solved by
yourself your audio specialist dealer will help you.
Vincent
31