Remote Amperage Switch - Miller SRH-444 Manuel Du Propriétaire

5-2. Remote Amperage Switch
NOTICE - Arcing can damage switch. Do not
change Remote Amperage switch position
while power is on. Arcing inside switch can
damage contacts, causing switch to fail.
1

Remote Amperage Switch

Use switch to select way of controlling
amperage adjustment.
For front panel control, place switch in the
Panel position.
2
3
5
For remote control, place switch in the
Remote position and connect remote
amperage control to remote amperage
control receptacle (see Section 5-1). See
example.
2 Example: Combination Remote
Amperage Control
3 Set Remote Amperage Switch
4 Select Amperage Range
1
4
6
Max (100 A DC)
Min (30 A DC)
5 Select Maximum Amperage
6 Adjust Remote Amperage Control
In example:
Range Selected = 30 to 280 A DC
Maximum Amperage Selected = 100 A DC
Min = 30 A DC
Max = 100 A DC
Ref. 122 035-B
Page 23