Use Of Rinse Aid - Zanussi ZDI121 Mode D'emploi

1
3
Fill the salt container with
1 litre of water (only the
first operation).

Use of rinse aid

Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
1
22
2
4
2
5
It is normal that water overflows from the salt con-
tainer when you fill it with salt.
Make sure that there is no grain of salt outer of the
salt compartment. Salt which stays on the tank for
a while drills the tank. It is recommended to start a wash-
ing programme immediately after you fill the salt con-
tainer. This prevents of corrosion because of spilled salt.
When you set electronically the water softener to level 1,
the salt indicator light does not stay on.
3
5
6
4
Fill when the rinse aid in-
dicator ( B ) becomes
clear.