Troubleshooting And Service - clage S 10 Mode D'emploi

14. Troubleshooting and service

Repairs must only be carried out by
authorised professionals.
If a fault in your appliance cannot be
rectified with the aid of this table,
please contact the service organisa-
tion of your importer or the Central
Customer Service Department. Please
have the details of the typeplate at
hand.
E-mail: info@vodonagrevateli24.ru / Website: https://vodonagrevateli24.ru
Problem
Water does not flow
Little water flows
Water does not heat
up
Water not hot enough
Steam emerges
Short-circuit
(fuse tripped)
No expansion water
If the connection cable is damaged, it must be replaced with an original spare cable
from the manufacturer by an authorised technician in order to avoid any hazards.
If you cannot rectify the fault with the aid of the troubleshooting table, please contact
the custo mer service.
: +7 (495) 215-29-17
Remedy
check and open main water tap, service valve, shut off valve
if necessary
check fittings and hose connections
check water pressure (< 1.5 bar)
clean jet nozzle at outlet, clean micro-filter
in service valve / relief valve if necessary
check fuse and electrical connection
check temperature setting on appliance
call customer service department to check thermal cut-out,
thermostat or heating element if necessary
check temperature setting on appliance
check temperature limitation
too much hot water may have been withdrawn within a
short space of time, wait for the water to heat up again
have the appliance checked by a customer service engineer
have the appliance and its installation checked by a
customer service engineer
pull out the main plug and contact the customer service.
25
CLAGE