Ironing Recommendations - SOLAC CVG 98 Série Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

OPERATION

•   P lug the Compact Vapor Generator into the mains. A buzzer will sound, the display will light up automa-

tically and the thermometer symbol will appear on the blink alongside temperature position 1 (•) and the 

medium steam position Fig.2. In addition, an icon will appear with the scale-preventing cartridge, for 30 sec,

indicating that your iron has a scale-prevention system Fig 2 (e). To replace it, follow the instructions in the

section "ANTICALC - SYSTEM". By default, the iron marks these positions when it is switched on.

Temperature selection

•   W ith  your  Compact Vapor  Generator  you  will  easily  know  when  it  reaches  the  selected  temperature  and 

is ready for ironing, as on the communication display the thermometer icon will cease to blink and at the

same time a buzzer will sound. Fig 2.

•   T he  CVG  has  4  temperature  positions  for  you  to  choose  between  by  pressing  the  temperature  selector 

button Fig 2 (h). If you press once, another dot will appear alongside the one already there (••), indicating 

that it is at temperature level 2. The thermometer will go on the blink again until the selected temperature

is reached. When it has reached it, the warning buzzer will sound and the thermometer will cease to blink

Fig 4. Temperature levels 3 and MAX are selected in the same way.

•   F rom the MAX temperature position, if you press the button again, the iron will revert to the initial position 

with 1 temperature dot, and so on. Press the temperature button for 2 seconds to disconnect the iron. To

restart it, simply press the button again.

Steam selection

•   T he Compact Vapor Generator has two steam positions; medium steam (20gr/min) and maximum steam 

(45gr/min). The medium value always appears by default when the iron is switched on. 

•   T o  obtain  maximum  steam,  simply  press  the  steam  selector  button  once  Fig 2 (i), and the steam icon

will appear in the display at its highest flow. Fig 5. To revert to medium flow, you just have to press the

selector button again. Fig 2 (i).

•   W hen you have chosen the appropriate temperature and steam flow for the garment, press the steam On-

Off switch Fig 6 (g) once and you may start to iron. It is not necessary to be pushing the steam button

continually, just press once and the steam will issue without interruption. To cut off steam output, press

the steam On-Off switch Fig 2 (g) again and it will cease to issue automatically.

• ECO-INTELLIGENT: this Solac Compact Ironing System includes a device for disconnecting the steam

function after 3 seconds of not detecting any movement. This ensures lower power consumption as

well as greater autonomy of the tank (lower water consumption).

• The steam function switches back on automatically when the slightest movement of the Compact

Ironing System is detected or when any of the steam outlet buttons is pressed.

AUTOMATIC SWITCH OFF: AUTO - PAUSE

•   T he Compact Vapor Generator has an automatic switch-off system. It is switched off automatically 3 minutes 

after the last time it was used. This means that once the device is actuated, the CIS ceases to heat and

begins to cool down. At that moment a buzzer will sound and the icon Fig 2 (f) will appear on the blink

for 5 seconds on the illuminated display, and it will continue blinking afterwards on the display when it

is not lit up Fig 7, indicating that the appliance has been switched off. To switch it back on, just move it

slightly or else press any of the three control buttons Fig 2 (g, h, i). The CIS will revert to the temperature

and steam position it had before being switched off.

•   R emember  that  the  period  between  being  switched  off  and  switched  back  on  again  will  affect  the  time 

that the CVG may need to regain the temperature selected previously.