Contact With Liquid - Siemens Gigaset A100 Notice D'utilisation

Tips
Maintenance
Simply wipe your telephone with a damp cloth or an anti-
static wipe. Never use a dry cloth as this can cause static
discharge!

Contact with liquid

If the handset should come into contact with liquid,
on no account switch the device on.
Remove all batteries immediately.
Allow the liquid to drip out of the device, and then dab all
parts of the device dry.
Keep the handset with the batteries removed in a warm,
dray place for at least 72 hours. In many cases, you will then
be able to use it again.
Troubleshooting
Malfunction
Registration did
not work.
No display.
No reaction to
keystroke.
No radio connec-
tion to the base /
station:
flashing!
Possible causes
The battery is not
sufficiently
charged.
Handset and
base station were
not prepared for
registration.
The battery is not
charged.
The keypad is
locked.
The handset is
outside the base
icon station range.
The handset is
not registered.
!
13
Solution
Charge the bat-
tery for 16 hours
(see page 12).
Remove and then
re-insert the pow-
er supply unit.
Charge the bat-
tery or replace it
(see page 7).
Press ª for
1 second.
Move closer to
the base station.
Register the
handset (see
page 12).