Siemens Gigaset A100 Notice D'utilisation page 13

Registering the handset manually
Handset A1 to an A100 base:
Manual registration has to be carried out if
• automatic registration has not functioned or
• the original handset supplied has been replaced.
¦ 7 ¦
k
Ö
• Manual handset registration will overwrite an existing
registration.
• The search for a base that is ready for registration can be
cancelled by pressing the handset key a .
Remove the power supply unit (220V/230V)
from its socket.
Prepare the handset for registration.
Place the handset in the base station and
leave it there until registration has been
completed.
Make sure the handset is still in the base
station. Now replug the power supply unit
into the socket.
The handset will now take about 60 seconds
searching for a base that is ready for regis-
tration.
A base that is ready for registration has been
found; registration was successful (display
appears for about 3 seconds).
No base ready for registration has been
found (display appears for about 3 seconds).
12