Sony RM-VLZ620T Mode D'emploi page 41

Clearing the learned function (page 20)
[from a single button] (e.g., clear the learned function from number button 1 in DVD mode)
1 2
Press SET for
over 3 sec.
[from a SYSTEM CONTROL or Device Select button] (page )
In Step 3 above, press the SYSTEM CONTROL button, or press a Device Select button for over 3 sec., then skip Step 4.
[all the learned functions under a specific device mode]
1 2
Press SET for
over 3 sec.
Assigning a channel to each number button (page 23)
[e.g., assign to number button  in TV mode]
1
Press SET for (e.g., TV)
over 3 sec.
[To clear]
Perform Steps 1 and 2, then press the programmed number button for over 3 sec.
Programming the consecutive procedures (page 24)
1 2
Press SET for
over 3 sec.
[To clear]
Perform Steps 1 and 2, then press the programmed button for over 3 sec.
Locking the controls (page 26)
[To lock]
Press SET for
over 3 sec.
Restoring the factory settings (page 27)
1 2
Press SET for (To cancel, press any button
over 3 sec. except
3
3
(e.g., DVD)
2
3
(e.g., SYSTEM CONTROL 2)
[To unlock]
Press SET for
over 3 sec.
3
before Step 3.)
4 5
3 4
Enter a channel number.
4
programme a consecutive
procedure.
5
5
1
GB