Quick Setup Guide
This guide shows you how to set the RM-VLZ0T to operate
your device. For details on settings, read the reference page.
Setting the manufacturer's code (page 12)
1
Press SET for
(e.g., TV)
over 3 sec.
Searching for the manufacturer's code (page 14)
1
2
Turn on your device.
Aim the RM-VLZ620T
at the device.
6
7
When the device turns
off, release the button.
Automatic power-on control (page 10) (Sony devices only)
[To clear]
1
2
Press SET for
over 3 sec.
Changing the volume control setting (page 16)
[To set the volume controls to AMP]
1
Press SET for
(e.g., DVD)
over 3 sec.
Teaching the new functions (page 18)
1
2
Place the RM-VLZ620T
Press SET for
head to head with your
over 3 sec.
device's remote control.
6
7
Press the button on the
other remote control.
[To teach to a SYSTEM CONTROL or Device Select button] (page 1)
In Step 4 above, press the SYSTEM CONTROL button, or press the Device Select button for over 3 sec., then skip Step 5.
0
GB
2
(e.g., 01454)
3
Press SET for
over 3 sec.
3
(e.g., TV)
2
3
8
Repeat Steps 4 to 6 to
teach other functions.
Symbol convention
: Press the buttons at the same time.
: Press the buttons in turn.
4
(e.g., TV)
[To set]
Perform the same
procedure.
3
4
Press the Device Select
button for the device you
want to control (e.g., DVD)
5
Press and hold to
start searching.
5
Press the button on the
RM-VLZ620T you want
to teach (e.g., ).